الصفحة الرئيسية
عن الكلية
عمادة الكلية
كلمة عميد الكلية
نبذة عن العمادة
العمداء السابقون
وكالات الكلية
وكالة الكلية
كلمة وكيل الكلية
نبذة عن وكالة الكلية
وكالة الكلية للدراسات العليا
كلمة وكيل الكلية للدراسات العليا
نبذة عن وكالة الكلية للدراسات العليا
الأنشطة العلمية
وحدة ريادة الأعمال
وحدة الجودة والتطوير
شعبة الإعتماد الأكاديمي
شعبة الجودة
شعبة القياس والتقويم
شعبة التدريب وتطوير الموارد البشرية
وكالة الكلية (شطر الطالبات)
إدارة الكلية
كلمة مدير الإدارة
كلمة مديرة الإدارة
إدارة الكلية شطر الطلاب
إدارة الكلية شطر الطالبات
الخطة الاستراتيجية
الشؤون التعليمية
مواقع التدريب التفاعلي
البحث العلمي
الأبحاث
مجلة كلية العلوم
تواصل معنا
الملفات
عربي
English
عن الجامعة
القبول
الأكاديمية
البحث والإبتكار
الحياة الجامعية
الخدمات الإلكترونية
صفحة البحث
كلية العلوم
تفاصيل الوثيقة
نوع الوثيقة
:
مقال في مجلة دورية
عنوان الوثيقة
:
Electrical and mechanical properties of bismuth oxide nanowire/poly(vinyl acetate)
Electrical and mechanical properties of bismuth oxide nanowire/poly(vinyl acetate)
الموضوع
:
كيمياء
لغة الوثيقة
:
الانجليزية
المستخلص
:
Poly(vinyl acetate) (PVAc) loaded bismuth oxide (Bi2O 3) nanowires was successfully prepared at low temperature and ambient pressure. X-ray diffraction and transmission electron microscopy were used to characterize the final product. It was found that Bi2O3 nanowires were formed and the diameter of the rods was confined to within 8 nm. The diameter and length of formed rods was found increase by increasing the bismuth oxide concentration in the PVAc matrix. The current-voltage (I-V) characteristic curves revealed that the charge transport is mainly nonlinear due to grain boundary contribution. The complex impedance spectroscopy was confirmed that the grain boundary effect controls the charge transport mechanism through nanocomposites. The deformation behavior after preparing the nanocomposites, irrespective of Bi2O3 concentration, is similar to that of the unfilled elastomer, implying that the mechanism of large deformation is mainly governed by the matrix. The mechanical measurements confirmed that the bismuth oxide has rod-like shape.
ردمد
:
0021-8995
اسم الدورية
:
Journal of Applied Polymer Science
المجلد
:
118
العدد
:
3
سنة النشر
:
1431 هـ
2010 م
نوع المقالة
:
مقالة علمية
تاريخ الاضافة على الموقع
:
Sunday, October 16, 2011
الباحثون
اسم الباحث (عربي)
اسم الباحث (انجليزي)
نوع الباحث
المرتبة العلمية
البريد الالكتروني
وليد السيد محمود
Mahmoud, Waleed E
باحث
دكتوراه
w_e_mahmoud@yahoo.com
أحمد عبدالله الغامدي
Al-Ghamdi, A A
باحث
دكتوراه
AGAMDI@kau.edu.sa
الملفات
اسم الملف
النوع
الوصف
31051.pdf
pdf
Abstract
الرجوع إلى صفحة الأبحاث