الصفحة الرئيسية
عن الكلية
نبذة عن الكلية
العميد
الهيكل التنظيمي التفاعلي
الجوائز والاعتمادات
الخطة الاستراتيجية "ابتسامة"
إدارة الكلية
الوكالات
وكاله الكلية للشؤون التعليمية
وكالة الكلية شطر الطالبات
وكالة الكلية للدراسات العليا والبحث العلمي
وكاله الكلية المدير لمستشفى الأسنان الجامعي
وكالة الكلية للتطوير
اللجان التابعة لعمادة الكلية
الأقسام العلمية
قسم علوم الفم التشخيصية
قسم طب و جراحة اللثه
قسم أحياء الفم
قسم استعاضة الفم والوجه والفكين
قسم جراحة الفم والوجه والفكين
قسم علاج الجذور ولب الأسنان
قسم إصحاح الأسنان
قسم تقويم الأسنان
قسم طب أسنان الأطفال
قسم الصحة العامة للأسنان
إدارة الكلية
الغايات و الأهداف
التعليم
برامج بكالوريوس
برنامج الامتياز
الدراسات العليا
برامج البورد السعودي
المرافق التعليمية
البحث العلمي
مستشفى الأسنان الجامعي
خدمة المجتمع
بيت الخبرة
الملفات
اتصل بنا
دليل المنسوبين
عربي
English
عن الجامعة
القبول
الأكاديمية
البحث والإبتكار
الحياة الجامعية
الخدمات الإلكترونية
صفحة البحث
كلية طب الأسنان
تفاصيل الوثيقة
نوع الوثيقة
:
مقال في مؤتمر
عنوان الوثيقة
:
Shear Bond Strength of Porcelain to New Ceramic Alloy Systems
Shear Bond Strength of Porcelain to New Ceramic Alloy Systems
لغة الوثيقة
:
الانجليزية
المستخلص
:
SinterKor (Pentron) is a high noble interpenetrating network ceramic alloy system utilizing a sintering technique instead of conventional casting. Objectives: This study compares the shear bond strength of porcelain to the following systems: Group A: SinterKor (Pentron); Group B: RxG alloy (Pentron); Group C: Bio 2000 (Argen) and Group D: Captek (Precious Chemicals Company Inc.). Methods: Ten (10) metal discs, 6.1 mm in diameter and 2.0 mm in thickness were fabricated for each alloy using the appropriate techniques. Ceramic side surfaces were finished to manufacturer recommendation, i.e. degassing of Bio 2000 and RxG, application and firing of corresponding Gold Bonders for SinterKor and Captek. Avante (Pentron) opaque porcelain was applied to all samples and fired. Avante dentine porcelain (Pentron) was applied over the opaque layer using a split mold, then fired to form a porcelain cylinder 2.75 mm in diameter and 3 mm high. Porcelain bond was tested in shear mode by applying the force to the interface of the discs using special apparatus in the Instron. Shear force for each sample were recorded. Results: The following mean shear bond strengths (MPa) were obtained: Group A 39.02 + 6.00; Group B 56.23 +7.07; Group C 43.96 + 7.22; Group D 41.86 + 13.08. ANOVA and Tukey test revealed no significant difference between groups A, C, and D; but group B had significantly higher bond values (p<0.05) than all other groups. Conclusions: The shear bond of porcelain to SinterKor is similar to bonds obtained with Bio 2000 and Captek. RxG casting alloy obtained higher porcelain bonds than the other alloys tested.
اسم المؤتمر
:
International Association for Dental Research (IADR)
الفترة
:
من : 11-3 هـ - إلى : 11-3 هـ
سنة النشر
:
2004 هـ
2004 م
نوع المقالة
:
مقالة علمية
تاريخ الاضافة على الموقع
:
Monday, May 5, 2008
الباحثون
اسم الباحث (عربي)
اسم الباحث (انجليزي)
نوع الباحث
المرتبة العلمية
البريد الالكتروني
ثامر مرغلاني
MARGHALANI, Thamer
باحث رئيسي
دكتوراه
THMRGHALANI@Kau.edu.sa
الملفات
اسم الملف
النوع
الوصف
Shear Bond Strength of Porcelain to New Ceramic Alloy Systems.pdf
pdf
الرجوع إلى صفحة الأبحاث